Zyxel Keenetic III Lite: Wi-Fi works unstable on TV and phone
Connected, Wi-Fi is there, everything is connected. But on one TV we watch TV channels through the application, ugh ugh ugh without interruptions. But on the other TV through the same application it is impossible to watch every 10 seconds, it shuts up and that’s it.
Other applications do not load the picture at all. We watch channels through the provider’s application (may have heard lanta tv) even if only one TV is on, it still stutters. And also for example the phone connects to wi-fi, the first 2 minutes works well, and then does not want to update for example the news feed in social networks. and in google is not looking for anything. You have to disconnect, reconnect and further updates, but again not for long. On the router switch is on the “main”. Please help, clarify)))))
Answer
Hello, it is very difficult to advise you. Since there is not even a specific problem and description. And all these “plugs up”, “does not connect”, it’s very difficult to understand when you don’t even see the problem.
We can assume that there is some interference on the Wi-Fi network channel. In that case, you could try experimenting with changing the channel.
Next, I would take the router, do a factory reset on it, and update the firmware. After that, I would set up the router again.
It could also be that the TV has a bad signal from the router (I don’t know that). Just on the one where there are problems with unstable wi-fi connection and watching TV.
Also, I would connect the TV to the router via cable, and check how it will work.
It should be understood that all the brakes in the program when watching TV can be due to low speed. Again, what speed you have I do not know.
Also, the problem may be in the TV itself.
The switch should be on “basic”. After all, Zyxel Keenetic III Lite works in router mode. The router modes are simply switched there.
0
Ramón