The Internet Lights (Wan Indicator) On the Router Does Not Burn
Almost all routers have a number of indicators that signal the operation of different ports and functions. These indicators are primarily used to diagnose malfunctions that occur during the process of setting up or using the router. Some manufacturers produce models with only one indicator, which, depending on the state of the device can light ...
4 
How to update the Firmware on the Linksys (Cisco) Router
Another instruction on Linksys (Cisco) devices, and in this article we will update the firmware of Linksys router. I will show the firmware upgrade process on the example of Linksys E1200 model. This instruction will work for other devices that have the same control panel. In terms of firmware, Linksys routers do not differ from ...
What to do If the Settings Were Dropped on the Router (Accidentally Pressed Reset)?
A router is a very interesting and unpredictable device. The Wi-Fi disappears all the time, or the Internet is interrupted, or the settings disappear altogether. In this article we will try to deal with the problem when the router suddenly resets to factory settings. Yes, as practice shows, it happens. Or, there are still cases ...
Fast Settings of the Tenda Ac9 Router (AC1200)
In most cases, there are no problems at all in the process of setting up routers from Tenda. All thanks to the simple control panel that is installed on these routers and the clear instructions that come with them. So you could prepare one instruction rather than writing a separate one for each model. But ...
LAN Port instead of WAN on the ADSL modem TP-Link TD-W8961ND
I have a TP-LINK TD-W8961ND router. There is no WAN port is it possible in the settings to configure lan place wan? Thanks in advance! Answer: I understand correctly, you want to use this ADSL modem as a regular router by connecting internet to it via network cable (RJ-45)? Since there is no RJ-45 WAN ...
192.168.1.1 – Entrance to the Router System, Login and Password Admin
This article will be useful for those who want to log into the settings of their router. Since most routers use the 192.168.1.1.1 address to log in, this guide will be universal and probably very popular. Despite what kind of router we have and what settings we want to change, we first need to log ...
The TP-Link Archer C24 Review is an inexpensive Two-Band Router with Support for the Repiter Mode and Access Points
Finally, we have an interesting, inexpensive router to review. It has everything that about 90% of users need. Support for the 5 GHz range, the ability to work as an access point or Wi-Fi signal booster, sufficient performance to provide a stable and fast connection to the Internet, and most importantly – a low price. ...
-
« Previous Page1
…109
110
111
112
113
…155
Next Page »