Removed the connection on the local network* 4 (Wi-Fi distribution). How to start the network again?
I used to be able to create an access point wi-fi. In the settings to change the adapter was a network “LAN connection* 4” through which and distributed wi-fi. then I accidentally deleted this network. now I can not create an access point because of the lack of just this network. And when I enter netsh wlan start hostednetwork through the administrator command line, it tells me:
Failed to start hostednetwork. The group or rurus is not in the right state to perform the required operation.
Now the difficulty is that I can’t get back, create this local network “LAN connection 4”.
Please tell me how to do it.
Answer:
Good afternoon. The problem is clear. It is not very clear how you deleted this connection, I don’t have the “Delete” option active. Anyway, I think you just need to recreate the network with the following command: netsh wlan set hostednetwork mode=allow ssid=”wifiwiki.net“ key=”11111111″ keyUsage=persistent.
Although I suspect you’ve already done that and it didn’t work.
Check to see if there is a virtual adapter in device manager. It may just need to be enabled.
I think that should help.
0
Ramón