Router TP-Link TL-MR3420. Does not go to the cable settings

Hello! I bought a new router TP-Link Tl-mr3420 to connect 3g Internet, the first thing I want to do is to configure the router, through wi-fi, in the settings can enter, but through the LAN is not. What I did not do, put the automatic obtaining of IP, myself prescribed the address, no reaction at all. What could be the problem?

Answer:

Hello. First of all, if you haven’t seen it yet, check out the tips from the article what to do if you can’t get into the router settings. Silly question, but on the router, do you connect the cable to the LAN port?

Do a router reset. The problem may be in the computer. Does the computer respond to the cable connection in any way? Maybe the cable is bad, or something with the network card. You’d have to check it out. If possible, try to enter the settings of TP-Link Tl-mr3420 from another computer.

Well, and the easiest way, if you can not enter the router settings by cable, then go to the wi-fi, and configure it. It is possible to configure via Wi-Fi, and there are no problems there.