Strengthening the Wi-Fi signal from TP-Link TL-WR841N by 150 meters. Connection of two houses

Good afternoon, I need your help. There are two separate buildings at a distance of ~150 meters. One of the buildings has internet and already has a router TP-LINK TL-WR841N. But the signal is weak does not reach the neighboring building. Phone tried to catch normal signal only in the middle of the path closer to the building signal disappears What-would you advise in this situation antennas are not removable on the router, buildings are likely to be on different phases and connect a repeater such as TP-LINK TL-WA850RE I think it is unlikely to get to pull the cable is also not particularly want to? What can you advise whether it is possible to connect a repeater TP-LINK TL-WA830RE, in our situation ? And there are other ways to strengthen the signal?

I will be grateful for your answer!

Answer

Good day. Network cable for 150 meters can not be laid. In the middle will have to put a repeater (amplifier). There even at 100 meters will be already strong losses, or will not work at all.

In your case, without additional equipment is unlikely to be able to strengthen the signal wi-fi. Especially if the signal is only in the middle of the path. Although, if without obstacles, TP-LINK TL-WR841N at 150 meters should break through the signal. Or in the first building, is the TP-LINK TL-WR841N not mounted near the outermost wall? It seems to me, if the router table on the window opposite the house in which you want to amplify wi-fi, it would reach. It is very difficult to advise something without knowing what and how you have there. The coverage radius depends on many factors.

Most likely you need to put external wi-fi access points. Something like TP-LINK CPE210. But it will be expensive. Or try something with external directional antennas, like TP-Link TL-ANT2409. But the problem here is that you can’t connect an antenna to TP-LINK TL-WR841N. In any case, in another house you will need to put another router that will receive the signal. Work in bridge mode (WDS). If it will be another TP-LINK.